product description:

The extruder (discharger) is a matching equipment of a planetary mixer or a multi-functional mixer. Its function is to discharge or dispense high-viscosity materials produced by the mixer. The single-cylinder and double-cylinder models are controlled by a torque motor, which can press the high-viscosity materials such as ink, adhesive and silica gel in the drum through the pressure plate to press the material from the pressure plate or the bottom of the drum. It is transported to the pipeline to enable various forms of packaging of the material. The equipment is divided into a bucket lift type and a fixed type.

【Material viscosity】:≤5,000,000cps

【Production capacity】:30-2000L

【Application field】:Applicable to the discharge of materials such as paint, putty, ink, adhesive, energy, electronic appliances, pharmaceuticals, cosmetics, food and other industries.

【Applicable material】:Various materials with a viscosity of less than 5,000,000 cps and a solid content of less than 90%; such as battery paste, solder paste, ceramic paste, silica gel ink, sealant, structural adhesive, soft ointment, jam and other thousands of materials.

Product advantages：

1. easy to operate, safe

The equipment is used as a lifting actuator through the oil cylinder, and the control valve controls the extruder to rise, stop and descend. The operation is simple and the stability is high. The equipment is equipped with a barrel fixing device, which can quickly fix the mixing barrel to prevent the barrel from being displaced during work. For safety accidents, an interlock can be set to prevent misoperation.

2. Wide adaptability and high discharge efficiency

The extruder can automatically press the high-viscosity material to the next process within a few minutes, and process the non-flowable material with viscosity from tens of thousands to several million CPS; the use of multiple interchangeable containers and presses can greatly improve Device usage.

3. the discharge is clean

The extruder has a sealing ring matched with the barrel. During the extrusion process, the sealing ring is close to the barrel wall and there is no residue on the wall.

4. non-standard strong

Can be customized for various types of non-standard products, such as explosion-proof, vacuum type; according to the discharge form and the height of the discharge port, can be customized with the barrel lifting extruder, the material can be customized SS316L stainless steel according to requirements.

working principle:

The hydraulic discharge machine consists of a bottom plate, a bucket positioning, a hydraulic cylinder, a beam, a motor, a gear pump, a pressure plate, and an electric control box. The hydraulic cylinder can be arbitrarily adjusted within the pressure range of 0-20MPa. The piston rod can stay at any position and can work continuously under pressure and voltage regulation. The pressure plate rubber ring is in contact with the barrel wall of the container (can be vacuum defoamed) The device can make the material not return to the outside, and the material in the container can be drained without being retained; the lifting support is lifted from the hydraulic pressure to the top position, which is convenient for the operator to package work, has the advantages of simple structure and convenient operation.