Many companies now use high-viscosity mixers for their production needs, especially in the paint industry or the flavor and fragrance industry. In order to improve work efficiency, the equipment will be used for manufacturing. The following is a brief introduction to everyone to explain the use of high viscosity mixers.

First, before using the high-viscosity mixer, it is necessary to check the discharge port, the feed port and the spiral to see if there are any debris. If it is, it needs to be cleaned before it can be used. In addition, when working in a high-viscosity mixer, especially when the various transmission parts of the equipment are running, do not put handles or other debris into the equipment. Otherwise, it is easy to cause injury to the operator. Or let the device malfunction and be damaged.

Secondly, in order to extend the service life of the high-viscosity mixer, it is not only necessary to carry out regular maintenance on it, but also to allow the high-viscosity mixer to idle for a period of time after starting the equipment, which takes about five to ten minutes. Confirm that the equipment does not have any abnormal noise, then the material can be put into the mixer for mixing and mixing.

Third, if conditions permit, companies are advised to use air switches or other protective devices with leakage protection to ensure better operator safety and better protection of the equipment's motor.

Fourth, if the high-viscosity mixer is not well-understood, or if the untrained personnel are unable to perform the inspection work on the high-viscosity mixer, even the commissioning work of the equipment cannot be carried out without authorization.

The above is the matter that should be paid attention to during the use of the high-viscosity mixer. If you master these contents, when using the high-viscosity mixer, the equipment will not be malfunctioned due to the incorrect method, thus shortening the service life.