The high-viscosity mixer is a new type of mixing equipment that can uniformly stir high-viscosity liquids. In the process of using, the microcomputer control technology can ensure the constant rotation speed. When the high-viscosity mixer is running, There are a lot of places to pay attention to, and I will give you a detailed introduction today.

1. During the operation of the high-viscosity mixer, there should be no abnormal noise, and the temperature rise should be checked frequently to ensure normal operation.

2. Check whether the working conditions of the running parts such as the V-belt pulley and the high-viscosity mixer are normal. If there is abnormal vibration or noise, stop it immediately and check it. For some damaged parts, Replace it immediately.

3. When feeding, do not exceed the maximum load of the high-viscosity mixer. If you need to add plasticizer during the operation, you should slowly add it, do not add it at one time, and do not suddenly add plasticizer. Pour into the equipment, which is very likely to cause agglomeration of local materials, causing a sudden increase in the load of the equipment, resulting in damage to the equipment.

4. If you need to change the color of the material machine, clean the discharge area and the mixing container.

5. When using it, it is necessary to formulate maintenance procedures and carry out proper maintenance according to the maintenance rules. After the equipment has been accumulated for ten hours for the first time, it is necessary to carry out a comprehensive inspection of the high-viscosity mixer. If necessary, it is necessary to All the connecting parts are tightened once.

There are many places to pay attention to during the operation of the high-viscosity mixer equipment. In addition to the above points, it is also necessary to check the tension of the V-belt. When adjusting the tightening screw, evenly tighten the V-belt. After that, tighten the locking bolts on the motor seat plate to avoid looseness. Check the heater regularly. If damage is found, replace it immediately. Also, regularly generate dust on the equipment. Clean up.