When it comes to high-viscosity mixers, I believe many of my friends are very familiar. Although it is not common in people's daily life, many companies engaged in production are very popular with it. Here are some of the precautions for the use of the high-viscosity mixer.

First, even if you are buying a high-viscosity mixer from a regular manufacturer, after it has been running for ten hours, you need to check the joints thoroughly. It is best to re-tighten if necessary. In addition, you need to check the tension of the V-belt. After adjusting the tensioning screw and tightening the V-belt evenly, you need to tighten the locking plate of the motor seat plate. In this case, More effective to prevent it from loosening.

Second, when using a high-viscosity mixer, it is necessary to keep all parts of the machine clean, especially the inner wall of the mixing container and the inlet and outlet of the refueling in the discharge hole. Always clean them. If you do not use a high-viscosity mixer for a long time, you need to apply anti-rust grease on the inner wall and the discharge part, so that the next normal use will not be affected by the rust.

Third, whether it is before use or after the completion of the mixing operation, everyone needs to carry out detailed inspections of the machine on a regular basis, and to do regular maintenance, especially those that are vulnerable parts, and even need to be checked frequently, if there is wear or damage, Everyone needs to repair or replace it.

Fourth, for the electrical design department of the high-viscosity mixer, especially the electric heater, if it is found to be damaged, it must not be able to continue to use, and must be replaced in time.

If you can firmly grasp these precautions when using a high-viscosity mixer, the machine can perform the mixing operation for a long time without any troubles affecting the normal operation of the work. In addition, in order to extend the life of the high-viscosity mixer, you need to pay attention to its maintenance.