Planetary mixer is a kind of powerful mixing and mixing equipment. It is made of high quality stainless steel material. It has short mixing period, strong movement and high work efficiency. It is used in many industries and should be debugged before use. In order to ensure the normal permission of the device. Today, I will give you a detailed introduction to the precautions for the use of planetary mixers.

1. When the power is connected, it is necessary to ensure that the ground connection of the planetary mixer is normal to prevent accidents. When making jog adjustment, from the above, it is necessary to ensure that the direction of rotation of its planet carrier is Turning clockwise, if it is found to rotate counterclockwise, it means that the wiring has an error and you need to reconnect to the power supply.

2. When the barrel of the planetary mixer is loaded and pushed into the machine base, the barrel should be fixed. After the barrel and the carrier are fixed, the equipment can be allowed. This can prevent the planet carrier from rotating and hurting. staff member.

3. If the material needs to be vacuum defoamed, check whether the water tank of the lower planetary mixer is filled with water, then open the vacuum pump, check the tightness of the vacuum piping, and do not leak anywhere. When closing the vacuum, first close the ball valve before the vacuum pump. When raising the planet cover, first open the vent and raise it after the pressure is released.

4. When operating the planetary mixer, if any abnormal conditions are found, stop the machine immediately and check it. After the fault is removed, the operation can be started again. Do not wait for the fault to run.

There are many precautions for the use of planetary mixers. In addition to paying attention to the above points, we must also pay attention to the fact that when the planetary mixer produces materials, do not reach into the barrel to prevent danger. After use, clean the material. The tube, but you must turn off all the power before you can clean it to avoid electric shock.