The vacuum defoaming mixer is also very convenient to use, because this machine can be fully automated, and you don't need to use a stirring rod to stir it yourself. It can complete defoaming and stirring at the same time. These two jobs. Since the vacuum defoaming mixer saves us a lot of power, we also need to carefully maintain and maintain it, so that it can be used for a longer time.

Vacuum defoaming mixer maintenance specific method steps:

1. No matter whether you turn on or off, you need to check the switch of the vacuum defoaming mixer. Whether the screw is normal or not can not cause hidden troubles.

2. Also, if the asbestos disc on the main shaft of the vacuum defoaming mixer is pressed tightly, if not, you need to add asbestos rope with lubricating oil as soon as possible to ensure that the spindle is in a very good condition.

3. Check whether there is oil leakage in all parts of the machine. The axles need to be refueled every day to make it more smooth when working.

4. If you are a newly purchased vacuum defoaming mixer, you need to let it idle for a few minutes without load, and make sure the machine is working again if everything is normal.

5. When using it, you need to check whether the connections of the machine are normal. Make sure the machine is in good condition to start working.

6. When you use the vacuum defoaming mixer, the fuselage will definitely heat up. Of course, the temperature must not be allowed to rise to 60 °C.

7. The tightness of the container must be very reliable, and the vacuum inside can not be lower than 0.07Mpa.

There are many precautions and protective measures for vacuum defoaming mixers. Of course, everyone must be careful when using them, and use the machine reasonably while ensuring their own safety. If you want to know more, you can also consult our customer service online to answer.